Jura

Jura A1 not starting up (video attached)  

Last post by -Dan- (February 21, 2022)

Topic Starter Dan
Replies 1, Views 1545

Printed Jura X7-S - Fragen

Last post by MichaGT (February 17, 2022)

Topic Starter MichaGT
Replies 0, Views 1603

Impressa c60 rattles and error code 8  

Last post by Candyqueen (February 10, 2022)

Topic Starter Candyqueen
Replies 0, Views 1459

Jura Impressa S9 struggling to pump water  

Water flow issues

Last post by Flyboy (February 04, 2022)

Topic Starter Flyboy
Replies 0, Views 1572

Jura Impressa S9 struggling to pump water  

Last post by Flyboy (February 04, 2022)

Topic Starter Flyboy
Replies 0, Views 1316

Jura ena7 not starting after cleaning

Last post by -Gast_Quint- (January 27, 2022)

Topic Starter Gast_Quint
Replies 0, Views 1521

Jura ENA Micro 1 grinder burr replacement  

is it posible to replace grinder burrs

Last post by -Jura ena 1 lover- (January 23, 2022)

Topic Starter Jura ena 1 lover
Replies 0, Views 1556

Jura Z6 Cleaning  

Jura Z6 cleaning system

Last post by -Gast_Gege- (January 17, 2022)

Topic Starter Gast_Gege
Replies 0, Views 1684

Jura Z6 Cleaning  

Jura Z6 cleaning system

Last post by -Gast_Gege- (January 17, 2022)

Topic Starter Gast_Gege
Replies 0, Views 1119

Cleaning  

Cleaning tablet does not dissolve

Last post by -Brigitte Weiß- (January 10, 2022)

Topic Starter Brigitte Weiß
Replies 0, Views 1342

A7 oath  

drawer missing

Last post by SamiF (January 07, 2022)

Topic Starter SamiF
Replies 0, Views 1198

Descaling  

Decalcification without request

Last post by -Gast_Gabi- (November 28, 2021)

Topic Starter Gast_Gabi
Replies 0, Views 1504

Impressa S95 does not flush......  

...only ground dry powder

Last post by Micky1985 (November 27, 2021)

Topic Starter Micky1985
Replies 0, Views 1107

Fault no. 8, after installation of the BG  

Loud start after reference until standstill

Last post by -Segadlo- (November 15, 2021)

Topic Starter Segadlo
Replies 0, Views 1198

Fault no. 8, after installation of the BG  

Loud start after reference until standstill

Last post by -Segadlo- (November 15, 2021)

Topic Starter Segadlo
Replies 0, Views 1211

Jura a7 start manual descaling  

Last post by -Gast_Robert- (September 22, 2021)

Topic Starter Gast_Robert
Replies 0, Views 1386

Jura S9 - Error 4 message  

Repair costs

Last post by tubu (August 23, 2021)

Topic Starter tubu
Replies 0, Views 2184

Jura S95 no coffee  

Possibly defective control board?

Last post by j.lehnene (August 19, 2021)

Topic Starter j.lehnene
Replies 0, Views 1072

Error message Fill powder  

JURA ENA Micro9 error message

Last post by FabianH (August 13, 2021)

Topic Starter FabianH
Replies 0, Views 1150

Jura X7C  

What Setting for 2 cups at the same time

Last post by coffeetcp66 (August 01, 2021)

Topic Starter coffeetcp66
Replies 0, Views 898

Jura X7C  

What Setting for 2 cups at the same time

Last post by coffeetcp66 (August 01, 2021)

Topic Starter coffeetcp66
Replies 0, Views 814

Jura ena4  

hums at rest

Last post by -Gast_Manuela- (July 04, 2021)

Topic Starter Gast_Manuela
Replies 0, Views 1185

Jura C60 display shows only red squares

Last post by Toolmaster (June 13, 2021)

Topic Starter Toolmaster
Replies 0, Views 1386

Jura z8 only drip

Is loud and it comes only drops

Last post by -Gast_Wolfgang- (June 13, 2021)

Topic Starter Gast_Wolfgang
Replies 0, Views 987

Jura  

Press Giga 5 Rotary Switch

Last post by -Gast_Luna- (June 09, 2021)

Topic Starter Gast_Luna
Replies 0, Views 1325