Hello everyone,
My Jura Impressa F7 basically works really well. However, the coffee is not really hot, even though the temperature is set to "high". I've already descaled the machine a few times, but I can't find any limescale lumps or similar in the descaling solution, so I assume that the actual limescale present is quite small and dissolves completely. Theoretically, however, there could be quite a lot of limescale in the machine, the machine didn't have a happy childhood ;-) I suspect the problem is more in the sensors or control system. Speaks temperature sensor and/or thermostat. However, I have no experience of such faults... What is your recommendation?
Thank you!
close
Share this post: