So, descaler should be in these KVA's no matter what manufacturer or model always on amidosulfonic acid basis. Information on the dosage, according to the manufacturer of the KVA's.
Should the decalcification process still not be able to be completed.
In my opinion, the error can only be due to the flowmeter, which passes on the water flow rate to the HP.
To access the flowmeter, the KVA must be opened. Be careful to disconnect the power plug. It is best to have a qualified electrician by your side.
Check the connections of the flowmeter, cables and plugs.
Open flowmeter, has bayonet lock, pay attention to hose positions, inlet - outlet.
Not to forget to clean everything.
As a note, if the KVA is open, I would also overhaul the brewing unit.
Search engines and videos can be found on the WWW.
--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.
close
Share this post: