Hello,
badly I have an annoying problem with my Monza.
>It's not easy to describe with words. I'll try`it anyway.
After the grinding process the "scraper" moves twice, with which the ground coffee is pushed into the marc container without brewing process
. The brewing process only takes place afterwards.
The behaviour started sporadically until rarely 2-3 weeks ago. Little by little it happened more and more often and since about 3 weeks I can only get my espresso after a "cold start". As soon as the machine is on a little longer I can't get an espresso anymore.
In the meantime the machine stops as soon as it is warm a little longer with the message "Group error". The upper piston stops somewhere.
And even then only a very long cooling down (4-5 hrs.) of the engine helps again.
I have already done a factory reset without improvement.
For safety and better illustration, I have made a video that I
link to if needed.
I'm sorry, but it's quite hard for me to interpret what the problem could be. Whether a sensor, the mechanics or the electronics, I don't know how to determine it.
Therefore I hope very much for your experience and help, so that I can order the correct component and replace it.
VG
close
Share this post: