Hello and good morning,
the meter can be read as far as I don't know at the Bosch. The Bosch doesn't have this function display at least not with menu.
Surely the customer service can read the meter reading like at Delonghi with a diegnosegerät.
The settings grinding degree, temperature, pre-brew (if possible) should and must always be adjusted anew for each bean, because depending on the roasting (lighter/darker) the grinding degree must be adjusted as a guide one can say light roasting fine grinding degree --- dark roasting coarse grinding degree.
The temperature is also very important and should be changed for each bean type. 100%Arabica can be brewed at a good 94°C. If Robusta is used, the brewing temperature should be below 90°C.
This has to be found out by testing and then bean roasting (Roasting Info) must be used to derive and readjust this.
--------------------
Kaffeevollautomaten:
Delonghi ESAM 3000B (2 Moante sehr zufreiden)
Saeco Talea Ring Plus (3 Monate UNzufreiden)
Jura ENA5 (1 Jahr super zufrieden)
Siemens EQ7 (8 Monate Anfangs toll dannach genervt 2 x zur Reparatur einmal neue BG ueber Support angefordert)
WMF 800 seit 1.12.09 Klasse
Siebträger
Bezzera BZ07 DE mit Bezzera BB005 Timer (Mühle) seit Mai 2011
Nespresso Krups XN 2720 für die Arbeit
close
Share this post: