Hello together,
>for some time I am rebuilding QM 5000, but this is unfortunately the first time that I do not know any more.
I took them apart as usual, cleaned and reassembled all hoses and parts.
The self-test runs normally when switched on. When I then press the flush button, I only hear a clack (should the solenoid valve be?). The pump does not start and after a few seconds it beeps and the water light comes on.
I already changed the pump. None of the used ones will start. There are only strange 135V on the pump for a few seconds.
> Has anyone ever stumbled across a problem like this?
Thank you!
>Constantin
close
Share this post: