AEG CG 6400 Startup problems

Hello,

have an older machine, approx. 8000 cups.... ... During the switch-on process the machine does not enter the normal start mode (water should come from both nozzles, then ready for operation).

The error symbol (triangle) appears after the switch-on process after some time. If you now turn the steam regulator on once and turn it back again after only 1 second, the error symbol is gone and the machine functions perfectly.

This happens after every switch-on procedure - as long as the machine is not switched off there is no malfunction - it is always only during "start-up".

What has already been done?: Decalcification via "normal way" and also via "switching on, switching off", so that the "upper brewing flask" is also decalcified with -but: no improvement!

Many thanks for solution suggestions....

Google for the resistance values and measure everything through.

--------------------
Nach vielen verschiedenen KVA habe ich jetzt meinen Seelenfrieden. WMF 800 :-)

www.DeMichaelLonghi.de

OK... thank you...