If you have now bought microswitches, then you must certainly pay attention to the normally closed and normally open contacts, otherwise it will not work.
Normally open contact: If there is an object in the area of the active switching zone, the output is switched through. Normally closed contact: If there is an object in the area of the active switching zone, the output is blocked.
What exactly is located somewhere, I don't know off the top of my head. Maybe you can find out more on the net.
--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.
close
Share this post: