Moin,
I am currently trying to repair my Saeco Xsmall and am encountering the following problem:
Neither during coffee dispensing nor during the simple rinsing process does anything come out of the coffee spout, it remains completely dry. The following steps have been taken so far:
1. Pump check: pump is fine, as hot water output through the nozzle works fine.
2. brew group: I have completely cleaned the brew group and especially the strainer.
I think it is the hot water control valve. If it is not installed, the amount flowing through looks like this:
https://drive.google.com/file/d/1XcGsevFFZx44AxZ4eX46qquGTmyVerJ6/view?usp=sharing
However, if it is installed, hardly anything comes out, just very little drop by drop:
https://drive.google.com/file/d/1AzOA_2tCudZVtr0WV8KMY3ODtZhnfGWd/view?usp=sharing
Could this be the problem and is there any way to fix the venitl?
Or does it need to be replaced altogether?
close
Share this post: