Thank you very much for the manual. Super illustrated and really helpful.
However, I have a small problem after the assembly of the locking part. I literally stick to the following passage or at least believe that I do:
QUOTE |
Toggle the BG several times for the final function test. To do this, pull the white sled all the way back and then push it all the way forward (repeat several times). To reinstall the BG into the machine, pull the white carriage all the way back at the end. |
The result is that the locking hook attached to the white carriage engages under the corresponding bracket on the black centre section. This means (of course) that the white slide can only be pushed backwards to a very limited extent because the hook runs into the lock. My actual problem is that I can no longer open the brewing group via the closing part, as is described in the operating instructions for cleaning purposes, for example.
I do not want to install the brewing group in the machine in this condition because I am afraid that a defect may occur.
I hope I've described my problem in an understandable way and I hope someone has a hot tip for me where I'm going to cause the error in the very last step.
I'll post some photos later to clarify my problem.
Thank you!
close
Share this post: