Good evening,
I have been repairing the above mentioned coffee machine for one week. The device has leaked (broken valve on the thermoblock) and therefore had to be looked after. When I was there, I carefully disassembled and cleaned the whole device.
After the assembly I have to find out that the machine is not working properly anymore.
>The following happens:
- Machine on
- System heats
- Please rinse glows
When I press then it does nothing...everything stays as it is.
Yesterday I could still make "coffee", but also here everything ran except the brewing unit. He then pumped the water directly through the drainage valve into the bowl.
Has anyone any idea why? Maybe a tip like I can check something out?! I'm really getting really lost
close
Share this post: