Good day,
I read here for some time and find it great.
So I could already save once our beloved machine and have replaced the Displey and drainage valve.
Now it does not run again after another four years and it always flashes the coffee and power button.
The display says fill system and I should press cafe, I do this unfortunately nothing happens.
I thought it was the flowmeter and have this together with the reed switch, microswitch and while I was at it, equal again the Dainageventil with replaced.
Unfortunately, this was all unsuccessful, at least the error is still there.
Could it also be the pump?
I hope you can help me.
Many greetingsIngo
close
Share this post: