Hello,
I took the brewing group from the display of the error 8 and was surprised that I don't get it after the cleaning anymore.
By now I know that the machine is not in the basic position. The brewing group would have to be inserted to get into it.
Now there is probably a microswitch that must be actuated to return the machine to its starting position, even without an inserted brewing group.
Below the cover, where the brewing unit is also located, there is a small circular, black cover at the bottom left. When I remove them, I recognize a transparent plastic part, which I can also easily push inwards. You can almost imagine it as the unlocker of a LAN cable. I don't know if this is the microswitch or if a cable is actually plugged in. In fact, it shows no effect when I press there and switch the machine on/off.
Where is the ominous switch or what other way is there to get the machine into the home position?
I use a CafeRomatica NICR8..
close
Share this post: